10' Model
RC10 · 10' Belt
A lightweight plastic cone topper supplied in fluorescent orange with a Black/Yellow Diagonal belt for straightforward temporary safety boundaries.
The universal end connects to compatible cone mounts and receiving ends. Choose an S-hook or magnetic end when the barrier needs to terminate at shelving, poles, racks, or magnetic surfaces.
The standard locking polycarbonate end connects to compatible cone mounts and receiving ends while helping prevent accidental release.
Standard
Hooks to compatible warehouse shelving or wraps around a pole and connects back to the belt without a separate receiver.
Optional Upgrade
Attaches directly to a compatible magnetic surface without a conventional receiving end.
Optional UpgradeUse RC10 and RC15 where traffic cones already provide warning visibility but a connected belt is needed to guide pedestrians or discourage entry between cones.
Both models fit securely over compatible stacked or weighted traffic cones and use the same fluorescent-orange safety finish. RC10 is the straightforward 10' option; RC15 adds longer coverage and broader belt customization.
A lightweight plastic cone topper supplied in fluorescent orange with a Black/Yellow Diagonal belt for straightforward temporary safety boundaries.
A steel cone topper with five additional feet of coverage plus 25 stock belt choices and custom-printing options.
Compare RC10 and RC15 materials, dimensions, cone openings, belt choices, weights, connection options, drawings, and literature.
Create the appropriate termination point for the selected belt end or compare other temporary safety products for more rigid and long-span applications.
Create a fixed termination point for the standard universal belt end on a compatible surface.
View Receiving End
Provide a defined connection point for the optional magnetic belt end.
View Magnetic Receiving Plate
Use weatherproof freestanding posts when the installation needs a weighted base instead of traffic cones.
View 10' Utility Posts
Choose rigid interlocking barricades for higher-volume perimeter control and crowd containment.
View Steel BarricadesA People Guidance Pro can help select the belt length, cone spacing, belt end, receiving hardware, and safety messaging for the work area.
A retractable belt traffic-cone topper is a reusable belt housing that fits over a compatible weighted or stacked cone. Extending the belt to another cone-mounted unit or compatible receiving point turns separate warning cones into a connected, visible temporary boundary.
RC10 is a plastic unit with a 10' Black/Yellow Diagonal belt. RC15 is a steel unit with a 15' belt and supports 25 stock belts plus custom printing. Their dimensions and cone-opening sizes also differ.
No. RC10 and RC15 are cone-top retractable belt units; compatible weighted or stacked traffic cones are purchased separately. RC10 has a 3.25-inch cone opening, while RC15 has a 3.5-inch opening, so cone fit should be confirmed before ordering.
Yes. The units can remain removable for rapid deployment or be fastened through bottom screw holes so the topper stays attached to a compatible cone. This secures the topper to the cone; it does not make the cone itself a permanently installed barrier.
A locking universal polycarbonate belt end is standard. Optional S-hook and magnetic belt ends are available for specialized termination points.
The standard RC10 is offered with a Black/Yellow Diagonal belt. Choose RC15 when the project requires other stock colors, safety messages, or custom printing.
Yes. RC15 belts can be customized with one-color silk-screen printing or full-color dye-sublimation. Custom-printed belts are approximately 1' shorter than the stated belt length.
Yes. Unlike disposable caution tape, the belt retracts into the housing and the cone-top units can be redeployed for changing work zones.
RC10 and RC15 are backed by a two-year limited warranty against manufacturing defects.
Still have questions? Explore answers across Visiontron products, ordering, customization, and support.
Search all Visiontron FAQs
