Look at Both Directions
Trace the approach to the guest and the route back out. The same opening may serve both movements, or a different return route may be more practical.
A queue gives people a route to follow. When someone inside it needs assistance, staff may need a more direct way in—and a workable route back out. Planning those access points is part of designing a queue for the people who use it.
Imagine a guest becomes unwell or is injured halfway through a busy queue. An employee spots the problem and calls for assistance. Staff or EMTs need to reach the guest, bring in any necessary equipment, and then help them leave the area.
The usual entrance and exit may not provide the most direct route. Following every turn in the line—or finding and manually disconnecting several belt ends—can complicate access. A planned opening gives the facility team a specific location to consider before that situation occurs.
Trace the approach to the guest and the route back out. The same opening may serve both movements, or a different return route may be more practical.
The connection matters, but so does the space around it. Review the complete path with the people responsible for operations and emergency response.
Consider where staff or responders would come from and which queue lanes they would need to cross. Keep intended access points identifiable to the team.
Account for the posts, bases and any lower belts or rigid panels. Releasing one belt does not remove those other obstacles or establish the space needed for equipment.
Allow for someone moving with assistance and for the equipment your response team expects to use. Check the route beyond the queue as well as the opening itself.
RETRACTA-BELT® panic breakaway belt ends are designed to release under applied force, allowing the belt to retract into the post. At an appropriately selected location, that creates a passage through a belt run without first operating a standard belt connection.

A magnetic connection holds the belt during normal use and disengages when sufficient force is applied from the side. Magnetic ends offer the more durable option and are available in two breakaway strengths.

Rubber panic breakaway belt ends provide a more economical release option. They are also available in two breakaway strengths, allowing the selection to be considered against the needs of the installation.
Both options can be specified with new RETRACTA-BELT stanchions or fitted to compatible existing posts. Confirm the post model, mating connection and intended direction of movement when choosing a configuration.
For the broader emergency-exit discussion and the Hoover Dam project example, read our guide to panic breakaway belt ends and egress.
Start with the access need, then select the hardware. Review the proposed arrangement with your facility’s safety team and the authority responsible for applicable egress requirements.
Identify staff, responders, the person receiving assistance and any equipment. Use that information to determine the required opening and maneuvering space.
Mark the approach and return route. Confirm release behavior for the intended direction or directions in the actual arrangement; do not assume every connection works identically from every angle.
Record the post model, belt connections and base style. Include all belt levels and nearby panels, furniture or other obstructions when considering an upgrade.
Send our team a photo or rough layout with the proposed access point marked. Include a close-up of the belt connections and tell us who needs to get through, in which direction, and with what equipment.
We can help check compatibility and identify magnetic or rubber breakaway belt end options for your facility team to review.
Magnetic and rubber panic breakaway belt end options can be fitted to compatible existing RETRACTA-BELT stanchions. Share the model and photos of the connections so the appropriate components can be identified.
No. It provides a release point in a belt run. The complete route also depends on placement, clear space, other barriers and the facility’s response plan. A breakaway connection alone does not establish code compliance.
That is a useful requirement to discuss when planning the installation. Confirm the connection, release strength, direction of force and surrounding space for the intended movements with your facility team and Visiontron.
Still have questions? Explore answers across Visiontron products, ordering, customization, and support.
Search all Visiontron FAQs →