RETRACTA-BELT™ MOUNTABLE HEAD SYSTEMS

Visiontron's Mountable Head Systems are designed to improve the safety and versatility of jobsite safety while increasing productivity. These units are used everyday, indoors or outdoors, in airports, theaters, banks, shopping malls, and warehouses; allowing or restricting access into your working environment. Shorter spans are ideal for aisles, hallways and cash registers; longer spans are ideal for parking garages, loading docks and driveways.

Features of Wall Mount and Warehouse Units:

•	Frees up valuable floor space when posts are not an option.
•	Three different mounting plate options: fixed/removable (standard), magnet/clip (M), or velcro (V).
•	Rounded corners prevent snagging or injuries from sharp corners.
•	Belt can extend left or right for a concealed look upon request.
•	E-Z Back Mechanism allows belt to retract slower and safer.
•	Message or logo imprinting for belts and caps are available.
•	Available with any standard belt.
•	5 year warranty on all parts.

AUTOMATIC WALL MOUNT UNITS - Designed to be surface mounted (permanent):

•	Belt spans up to 7'6", 15', 20' or 25'.
•	Comes with our standard belt end for easy attachment to Retracta-Belt™ posts or most other manufacturers' posts.
•	Requires our standard wall mount receiving end (Model RE.)

700 Wall Mount Series

Model # WM700

•	Belt spans up to 7'6".
•	Available in same belt colors and finishes as our standard Model 300 Retracta-Belt™.

412 Wall Mount Series

Model # WM412-15
15' Wall Mount Unit

Model # WM412-20
20' Wall Mount Unit

Model # WM412-25
25' Wall Mount Unit

•	Belt spans up to 25'.
•	Head comes in black powder coated finish only.
•	Extra mounting plates can be purchased allowing you to use one unit in several locations, thereby saving you money.
•	Dimensions: 4 1/8" wide x 5 1/8" deep x 3 7/8" high.

Wall Receiving Unit

Model # RE

•	Will accept belt clips from our WM700 and wall mounted 412 units as well as all standard Retracta-Belt™ Posts.

AUTOMATIC WAREHOUSE UNITS - Designed for semi-permanent applications:

•	Belt spans up to 7'6", 15', 20' or 25'.
•	Features a universal "s-hook" belt end to allow easy wrap around of shelf post to belt or attaches directly to shelving
•	Three different mounting plate options: fixed/removable (standard), magnet/clip (M), or velcro (V).

Shown with optional Velcro Mount

Shown with standard Fixed/Removable Mount

700 Warehouse Series

Model # WH700

•	Belt spans up to 7'6".
•	Available in same belt colors and finishes as our standard Model 300 Retracta-Belt™.
•	Available with fixed, magnet/clip or velcro mounting plates.

412 Warehouse Series

Model # WH412-15
15' Warehouse Unit

Model # WH412-20
20' Warehouse Unit

Model # WH412-25
25' Warehouse Unit

•	Belt spans up to 25'.
•	Head comes in black powder coated finish only.
•	Available with fixed/removable, magnet/clip or velcro mounting plates.
•	S-hook end doesn't require receiving ends.
•	Dimensions: 4 1/8" wide x 5 1/8" deep x 3 7/8" high.

412 Series Mounting Plates

Model # WP412
Fixed / Removable Wall Plate

Model # WP412M
Magnet/Clip Wall Plate

Model # WP412V
Velcro Wall Plate

•	Purchase extra mounting plates so your WH412 series unit can be used in more than one location.

Visiontron's WAREHOUSE UNITS (WH) can be easily attached and removed from standard upright shelving in minutes and are supplied with a universal belt hook which can wrap around or attach to shelving. Receiving ends are not required. Mounting solutions are accomplished using three different mounting plates.


Fixed/Removable Plate allows you to permanently attach the mounting plate to a wall for a fixed or removable head application (WH700 and WH5000 do not have removable option.) Unit becomes fixed by adding a screw.	Magnet/Clip Plate allows the unit to attach to shelving by means of a strong magnet and clip that hooks into the holes or slots in most shelving units. (3/8" minimum slot or hole required.)	Velcro Strap Plate allows for a quick and temporary installation on any column or post ranging from 1 1/2" to 5" diameter. (Longer straps are available.) This plate allows you to mount to wood beams, support columns, or practically any other upright without holes.

MANUAL RETRACTING UNITS:

•	Belt spans up to 50' without sagging.
•	The tension is adjusted by our manual crank design.
•	Unit comes standard with 3" Black/Double-Green belt as shown. If requested, we can supply any of our standard 2" belts (shorter maximum lengths with 2" belt.)
•	Wall mount models require HDRE receiving ends.

5000 Wall Mount Series

Model # WM5000

•	Belt spans up to 50'.
•	Head comes in black (SB) powder coated finish only.

Heavy Duty Wall
Receiving End

Model HDRE

•	Will accept belt clips from our WM5000 units and Skipper 29'6" cone mount Retracta-Belt™.

Standard Belt Colors:


Blue BL	Red RD	Maroon MN	Grey GR	Green GN

Dark Green DG	Black BK	Black w/Wht. Stripe BW	Dark Blue DB	Yellow YW
Black / Yellow Diagonal BYD
Standard Printed Messages:

"CAUTION - DO NOT ENTER" - Double Sided Black Text on Yellow CAU
Standard 3" Belt Color

Black/Double Green Stripe BGG

Applications for Visiontron's Crowd Control Equipment include:
Airports, banks, theaters, hotels, retail/department stores, conference centers, casinos, restaurants, bars, warehouses, office building lobbies, zoos, supermarkets, amusement parks, bus and train stations, outdoor concession areas, outdoor spectator events, construction zones, car rental lots, stadiums, schools and school yards, churches, car shows, museums, mall displays, distributors, municipalities, Home Owner Associations, state and gov't agencies; i.e. DMV, & post offices.

The Crowd Control Experts
1-800-585-7750

Retracta-Belt™ Mountable Head Systems

Standard Belt Colors:

The Crowd Control Experts 1-800-585-7750

Retracta-Belt™ Mountable Head Systems

Standard Belt Colors:

The Crowd Control Experts
1-800-585-7750