22" w x 28" h Designer Series Sign Frame

22" w x 28" h Designer Series Sign Frame

Product Code: FR2228DS

    
Designer Series Sign Frames attach to Retracta-Belt posts and Conventional Stanchions with no additional hardware. Conventional Stanchions need to be drilled and tapped at the factory. Adapters are available to work with other manufacturers’ posts. Removable Mount units are strongly recommended when signs need to be changed on 6’ tall posts frequently (i.e. at shared gates at airports.)

This sized frame requires a Metal Post Cap when used with Retracta-Belt stanchions (already included on 2-1/2” diameter Sign Posts w/ Sloped Bases)

Price is based on size – mix and match frame and corner finishes at no additional charge.
Frames can accept material up to 1/4" thick. 1/16" thick Non-Glare Plexiglas Inserts are available to provide additional protection of your signs (1 piece) or to allow you to display your own paper signs (2 pieces.)
A locking hinged top (via a set screw) is available for an additional charge to prevent tampering.

*Universal Sign Frame Adapter Cone is required for VS301 models and G4 Retracta-Belt Posts with 3" Belt, but can also be used on all legacy 7.5' and 10' Retracta-Belt posts. Frames 14"x22" and larger are not recommended for use with the Universal Sign Frame Adapter Cone unless they are used in low traffic areas.
Size
22" w x 28" h

Frame Finish
Smooth Black - SB Polished Aluminum - PC
Polished Brass Aluminum - PB

Corner Finish
Smooth Black - SB Polished Chrome - PC
Polished Brass Plated - PB

Non-Glare Plexiglas Inserts (1/16" thick) for signage protection
None 1
2

Locking Hinged Top
Yes No

Add Universal Sign Frame Adapter Cone?*
No Yes - CSB