Custom Imprinting to Belts

Visiontron offers two methods to imprint your message or logo to belts in any of our Retracta-Belt™ crowd control stanchions. For simple graphics on our stock colored belts, we generally silkscreen the message. Visiontron now has the ability to put practically anything on the belt using dye sublimation (dye-sub.) We are capable of producing small runs of a custom colored belt affordably. You can add complex graphics with gradients and multiple colors; even pictures! Contact us and we'll help to determine the best method of printing.

Examples of Printed Belts

Silk Screened Belts	Dye-Sub Belts	Dye-Sub Belts (Close up)

Logo Imprinting to Belt

Model # RET-B

Custom Imprinting to Post Caps

Brand your Retracta-Belt™ crowd control posts with custom post cap labels and make them truly yours. Place your company logo on the label for easy identification and to prevent "borrowing."

Logo Imprinting to Post Cap

Model # RET-L

Base Accessories / Floor Protection

Base Accessories/Floor Protection

Felt Floor Protectors (Model #220F)
Available in 11-1/2" diameter for stanchions with dome base.
1/8" thick felt with adhesive
backing to protect flooring
(Indoor use only).

Rubber Bumper Molding (Model #221)
Prevents scuff marks on the floor when posts are dragged on an angle.


14" Diameter Beveled Retracta-Belt™ Base	12" Diameter Flat Portable Post Base	11.5" Diameter Dome Base

Rubber Bumper Molding

Model # 221

Felt Floor Protector

Model # 220F11

**Note - All Retracta-Belt™ units and stanchions with flat bases come standard with a molded rubber floor protection. Rubber Bumper Moldings are still available because they protect the corners of metal base covers from damage.

Wall Mount Receiving Ends

Wall Mount Receiving End for Retracta-Belt Posts

Connect the end of a queuing line to a wall. For all Retracta-Belt™ lines, including all post and wall mount models, use Model # RE Wall Mount Receiving End. Also available with a magnetic mount, Model # RE-M.

For Conventional Posts and Ropes, use Model # WP Wall Plate. The Wall Plate will accept one rope end. Available finishes: Black (SB), Polished Chrome (PC) and Polished Brass (PB).

Wall Plate for Conventional Posts and Ropes

Receiving Ends for Retracta-Belt™ Posts
Wall Mounted Receiving End	Model # RE
Magnetic Mounted Receiving End	Model # RE-M
Wall Plate for Conventional Posts and Ropes
Model # WP

Applications for Visiontron's Crowd Control Equipment include:
Airports, banks, theaters, hotels, retail/department stores, conference centers, casinos, restaurants, bars, warehouses, office building lobbies, zoos, supermarkets, amusement parks, bus and train stations, outdoor concession areas, outdoor spectator events, construction zones, car rental lots, stadiums, schools and school yards, churches, car shows, museums, mall displays, distributors, municipalities, Home Owner Associations, state and gov't agencies; i.e. DMV, & post offices.

The Crowd Control Experts
1-800-585-7750

Accessories for Retracta-Belt™ & Conventional Posts

Base Accessories / Floor Protection

The Crowd Control Experts 1-800-585-7750

Accessories for Retracta-Belt™ & Conventional Posts

Base Accessories / Floor Protection

The Crowd Control Experts
1-800-585-7750